Ensure that the surface is clean and free from dampness, dirt and other contamination.

Sand the surface using #180 Sandpaper and clean thoroughly. Ensure that no loose particles are sticking to the wall

For areas severely affected by algae and fungi, ensure that the surface is completely cleaned before initiating the painting process

Freshly plastered surfaces must be allowed to cure completely. The coating process can be started after a minimum period of 30 days.

For Interior Walls

Ensure that fresh walls are coated with one or two coats of white cement

Apply 2 coats of Altura Wall Primer with an interval of 4 – 5 hrs between subsequent coats

Undulations in the wall can be levelled using any good quality acrylic putty or cement based putty

Sanding of the first / second coat of Altura Wall Primer can be done using #320 Sandpaper

Topcoat can be applied after an interval of 4 – 5 hrs of the second coat of Altura Wall Primer

For Exterior Walls

Ensure that fresh walls are coated with one or two coats of white cement

Apply 1 to 2 coats of Altura Wall Primer with an interval of 4 – 5 hrs between subsequent coats

Sanding of the first / second of Altura Wall Primer can be done using #320 Sandpaper

Topcoat can be applied after an interval of 4 – 5 hrs of the second coat of Altura Wall Primer

Stir well before thinning the Paint

Mix 35 – 40% of potable water